Get Schwifty New Serial GLink232T UP9600 +Tools!
Let’s start off with how much pain the c64/128 was with serial communications in the day. If you had a 1670 or something in the 300 baud trash connection.. it didn’t matter — you were …
Let’s start off with how much pain the c64/128 was with serial communications in the day. If you had a 1670 or something in the 300 baud trash connection.. it didn’t matter — you were …
To start, I’ve been using a Zoom Floppy for years now — a bare board dangling beside all the IEEE gear. I’ve been meaning to make a case, but as it happens someone else in …
I’ve managed connect my PCI Catweasel card to pass-though on my ESXi server. I took a bit of work and it’s not perfect (ie no Joysticks or Mice work) but the disk subsystem works great. …
http://www.64bites.com I will say three things about Michal’s c64 programming series: his videos are fun, fast and packed with information. I am not a bad assembly programmer, -not the best- but not bad. After watching …
Hardware Changes and Adjustments (Part 1 of 3) OS3.9 on DH0: and OS1.3 on DH1: — Easy booting to each OS. Replaced the AMIGANET 1.1 / Hydra with and XSurf100 using AmiTCP. Networking is going great in …
Well, this has been fun. Lets start with juggling soldering irons is only good for the dexterous — which strapping a brick to my solder station is looking like a better idea every day. Yuri …
Making ROM’s has been on my mind for a long time. Every so often the need arises, or so I have told myself. A while back I bought a Willem PCB45 EPROM burner, thinking I’ll be …
* Update * It’s not a matter of compatible cards by the looks of things. My TC seems to have some timing issues. I’ve had this problem before with a firmware update — but fixed …
I managed to load 9c on my TC64, and everything works fine! Amazing.
Backing up the collection, is causing some permanent damage. Every so often the drive just starts gagging on a disk, so I stop the process and open the drive. I’ve actually started to just …